2004 Hinckley Talaria 29 Runabout

INTRODUCTION:

The Hinckley Talaria 29 Runabout combines elegant lines, modern technology and design and heirloom quality craftsmanship, resulting in a boat that is fun and easy to operate. With comfortable seating for at least eight, protections under a removable bimini and a small cuddy cabin with v-berth and VacuFlush head, she is perfect for a day on the water with family and friends or the occasional overnight. PAPPY has been well maintained and upgraded by her current owner and is currently stored inside a climate controlled building at the Hinckley service yard and is easily seen.

Significant upgrades in the past five years include:

• Fuel tanks polished
• Hull Awlgripped
• Bottom stripped
• Exterior varnish stripped and redone
• Dash area trim replaced or stripped as needed
• New Garmin electronics
• All cushions recovered
• Helm seats recovered
• New Yanmar 440 common rail engine
• New custom trailer
• New Fusion stereo system

HULL & DECK:

Construction:

• Hull is DualGuard™ Composite construction Kevlar® E-glass skin with balsa and Corecell® core carbon fiber inner skin, SCRIMP® with Vinylester resin. 
• Deck and cockpit are E-glass with balsa and Corecell® core, SCRIMP® molded with Vinylester resin. 
• Hinckley designed heavy-duty fiberglass swim platform has teak insert treads, stainless steel bracket and half round.
• Telescoping, stainless steel, 3-step folding swim ladder stores under swim platform.
• Flag Blue Awlgrip hull sides (2021)
• Cream gelcoat deck with molded in non-skid
• Double cream boot stripe (2021)
• Green bottom paint (bottom strip done 2021)

Deck:

• Self-draining bow locker for anchor/windlass with flush fiberglass hatch

• Rounded, tapered, varnished teak toe rail with Hinckley profile
• Stainless steel half-round on fiberglass molded rub rail
• Custom Hinckley 316L stainless steel Hinckley bow chocks
• Stainless steel pull-up bow, stern and midship cleats
• Folding stainless steel padeyes for fender clips with stainless chafe strips on toe rail
• Stainless steel rod holders with covers
• Exterior varnished stripped and redone 2021

COCKPIT:

A full-width, forward-facing cushioned settee is at the transom. A cushioned, aft-facing settee is molded into the stern side of the engine box next forward. The teak covered engine box with built-in sink and insulated cooler is convenient to both the aft and forward seating areas. Next forward is a cushioned L-shaped seating lounge area. Forward is the helm and navigator dash area as well as the companionway to the forward cuddy cabin.

• Teak decking on cockpit sole
• Full Ivory-colored tonneau cockpit cover attaches to windshield and cockpit cap rail covering entire cockpit when not in use.
• Custom wrap around three window curved tempered glass windshield with teak coaming cap
• Cockpit bimini with side and aft clear isinglass drop curtains with opening roll up front and side windows (new 2019)

CUDDY CABIN:

• Through the forward sliding cuddy companionway door there is a small cabin finished in satin-varnished cherry with a white acoustic overhead with trim. 

• There is an opening overhead hatch with removable screen for additional light and natural airflow.
• Accommodations for two include a V-berth
• Storage bins under the cushions
• VacuFlush 12-volt toilet plumbed to 10 gallon holding tank and overboard discharge (head covered under v-berth cushion)
• (2) Frigast 12-volt stainless steel lights
• Fusion MS-RA770 stereo with Bluetooth (2021)
• Electrical panel on aft bulkhead next to companionway door

COCKPIT FORWARD:

• Forward is the Helm Area with Luxor Leather upholstered helm and passenger chairs that can be swiveled aft. (seats recovered 2021)
• Flush watertight cockpit sole hatch between the seats offers additional storage
• Stereo speakers port and starboard outboard below each shelf. (Fusion speakers new 2021)

Port:

• Passenger area has a varnished teak, locking glove box forward of the passenger seat with stainless steel handrail and carbon fiber face.
• Outboard is a varnished teak shelf with a recessed cup holder. 

Starboard:

The Helm Station features:

• Varnished teak covered dash with carbon fiber face.
• 15” Stainless steel steering wheel with varnished wood rim. (new 2021)
• Hinckley JetStick™ which integrates forward and aft motion, steering, and the bow thruster into a single joystick control.
• Engine digital display and controls.
• Windlass control at helm with additional plug for wired control in anchor locker.
• Port and starboard windshield wiper controls with freshwater washer (washer replaced 2020)

Helm Nav/Electronics Equipment:

• Garmin GPSMap 942xs color touch screen chartplotter (new 2020)
• Garmin 210 DSC VHF Radio with AIS (new 2020)
• Ritchie compass
• Fuel gauge
• Rudder angle indicator
• Trim tabs with trim angle gauges
• 12v USB double outlet with battery voltage indicator

Lounge Area is just aft from the helm area with an L-shaped inboard and forward-facing curved settee with a varnished teak shelf cap. 

• Settee cushions are covered in Luxor Leather (2021)
• Two storage lockers under bottom cushions
• Bi-folding triangular teak varnished table

MID-COCKPIT:

The varnished teak covered engine box has electric-lift access to the engine area. 

Other amenities:

• Top-opening access to a sink with pressurized freshwater
• Top-opening access to an insulated cooler
• Aft facing seating for two on the aft end of engine box
• Cockpit speakers (new Fusion 2021)

AFT COCKPIT:

• Full-width, forward-facing aft settee with seating covered in Luxor Leather  with removable storage tubs under the stern seats can be lifted out for access to systems in lazarette below

• Freshwater shower is located under coaming starboard
• Direct drainage scuppers
• (2) Stainless steel drink holders at deck level
• 15amp 110v inlet for battery charger
• Main battery on/off switches are under port stern seat locker
• 12v outlet
• Rupp fishing rod holders under side deck port and starboard
• Courtesy lighting under side decks

ELECTRICAL SYSTEM:

Low resistance, heavy copper and sacrificial zinc anode electrical bonding system includes zinc saver:

12-Volt DC Electrical System:

Batteries total 420-amp/hrs.:

• (1) 12-Volt Lifeline AGM Group 31 – 880 CCA start battery (new 2021)
• (1) 12-Volt Lifeline AGM Group 4-D 210-amp/hr. house battery (new 2021)
• Heavy-duty battery parallel switch – Emergency start capable
• 80-Amp battery alternator
• 20-Amp multistage battery charger
• 12-Volt distribution panel with breakers, volt and amp  meter

110-Volt AC Shore Power Electrical System:

• Shower power inlet 15-amp with breaker for battery charger

MECHANICAL/ENGINE DETAILS:

2019 Yanmar 6LY 440-HP 6-cylinder common rail diesel engine with Hamilton 292 Jet Drive. 85 hours September 2024.

•  Twin Disc ZF IRM 220 transmission
• 12-volt DC 5” reversible bow thruster
• Hinckley  JetStick®  steering control system is integrated with bow thruster.

Mechanical features include:

• Racor fuel filter/water separator. Fuel polished 2022.
• Yanmar digital engine display
• Alarms:  Low engine oil pressure, hydraulic pressure, high water temperature
• Oil transfer pump for engine and transmission
• Manual hydraulic steering pump
• (2) Electric Rule 2000 12-volt bilge pumps with float switches (upgraded 2020)
• Whale emergency bilge pump mounted in cockpit seat locker

Engine sound insulation:

• Lead-lined foam insulated engine box with double gaskets on cover
• Baffled and insulated engine air intake
• Custom muffler

EQUIPMENT:

• Varnished teak bow burgee staff with flush socket
• Stern mounted 4 ft. varnished teak staff with flush socket
• Life jackets
• Hand-held flare kit
• Running lights
• (2) Fire extinguishers
• Bell - 6” Brass
• (4) Dock lines

• (2) Fenders
• Life ring
• Custom trailer (2021)

Ground Tackle: 

• Hideaway Electric Anchor Windlass System with dashboard and remote handheld control
• Delta anchor with 15’ stainless steel chain and 150’ Rode Muir electric windlass with folding stainless steel roller and remote control.