Basic Boat Info
Make: Chris-Craft
Model: Double Cabin Flybridge
Year: 1954
Condition: Used
Category: Power
Construction: Wood
Boat Hull ID: C45C19--287947
Has Hull ID: Yes
Dimensions
Length: 45 ft / 13.72 m
Length Overall: 44'9 ft / 13.64 m
Beam: 12'6 ft / 3.81 m
Max Draft: 29 ft / 8.84 m
Dry Weight: 8,845.05 kg
Cabins Count: 2
Engines / Speed
Engines: 2
Engine #1 Specs:
- Make: Chris Craft
- Model: W
- Drive Type: Direct
- Fuel: Unleaded
- Engine Power: 160hp
- Type: Inboard
- Propeller Type: 3 Blade, Bronze
- Year: 1953
- Engine Location: Starboard
Engine #2 Specs:
- Make: Chris Craft
- Model: W
- Drive Type: Direct
- Fuel: Unleaded
- Engine Power: 160hp
- Type: Inboard
- Propeller Type: 3 Blade, Bronze
- Year: 1953
- Engine Location: Port
Total Engine Power: 320hp
Tanks
Fuel Tanks: 1
Fuel Tank Capacity: 1,041 L
Water Tanks: 1
Water Tank Capacity: 273 L
Other
Heads Count: 1
Drive Type: Direct
Boat Class: Antique and Classics, Flybridge
Key Features
- Pettit Easypoxy White hull sides with Pettit Easypoxy Red waterline; Pettit Copper Bronze Antifouling; hull planking in excellent condition.
- Foredeck and catwalks stripped/stained/sealed/varnished with Pettit Captain's Varnish in 2019. Cabinsides and coamings received maintenance coats in 2019.
- Twin Chris-Chris Model W engines (160 HP each) with Paragon Transmissions with Reduction Gear all rebuilt in early 1990's. Hour meter reads 797 hours. Compression check performed in 2018 and seatrialed in summer 2018 prior to refit.
- New Blue Seas Systems Custom360 240v/120v/12V electrical panel with new wiring throughout with Xantrex Freedom SW 2012 Inverter/Charger. Next step in refit is to make connections from all wire runs to panel. 50A/240V inlets on both Port and Starboard side aft with selector switch on Main Panel.
- Dometic VARC Chiller system for heating and cooling of the cabins with zone controls for each unit. 48,000 BTU system with 5 air handlers: 5000 BTU for the Forward Cabin, 6000 BTU for the Galley, 18,000 BTU and 6000 BTU units for the Main Salon, 12,000 BTU for the Master Stateroom aft, and 4000 BTU for the Head. Chiller unit mounted underneath aft cockpit floor and circulation pump mounted under starboard berth in Master Stateroom. All plumbing is run but connections need to be made at each unit and power connections need to be made at the panel.
- Close-quarter maneuvering provided by bow and stern waterjet thrusters from Jet Thruster JT90 24V system. High-volume pump and intake mounted amidships under main salon pumps water forward and aft to ports mounted in bow and stern. All plumbing is run and connected. Controls need to be mounted at dash.
- LED overhead dimmable lighting throughout the vessel with Vimar switching.
- Forward Cabin contains two twin berths with custom wicker frames and custom quilted plush mattresses. Beadboard in overhead with LED dimmable lighting. Forward anchor locker contains 2 custom mahogany varnished doors. Hanging closet to port contains 6000 BTU air handler and custom mahogany varnished door. Vinyl teak/holly plank material and teak trim ready for installation in floor similar to Flybridge floor.
- Galley contains custom quartz countertop with stainless steel undermount sink and fixtures to starboard with ample storage above and below counter. Dinette to port includes custom mahogany table with checkerboard inlay and drawers beneath seating. Beadboard overhead and trim with LED dimmable lighting. Vinyl teak/holly plank material and teak trim ready for installation in floor similar to Flybridge floor.
- Main Salon is spacious with abundant natural lights from windows and additional lighting overhead from dimmable LED lighting. Cabinet to starboard contains electrical components and 6000 BTU air handler. Sliding cabin doors to port and starboard for entry and exit to/from catwalks. Steps forward lead down into Galley. Steps aft lead to Master Stateroom. Ladder after leads up to Flybridge and Helm. Beadboard and trim ready for installation overhead similar to Galley and Forward Cabin. Vinyl teak/holly plank material and teak trim ready for installation in floor similar to Flybridge floor.
- Master Stateroom contains 2 berths with custom quilted plush mattresses. Berths contain drawers underneath. Cabinet to starboard contains 18,000 BTU and 12,000 BTU air handlers for the Main Salon and Master Stateroom in addition to drawers for storage. Hanging locker amidships contains mechanicals and Electrical Panel access. Beadboard and trim ready for installation overhead similar to Galley and Forward Cabin. Vinyl teak/holly plank material and teak trim ready for installation in floor similar to Flybridge floor.
- Bronze portlights refurbished and polished throughout and ready for final installation.
- Aft cockpit has teak floor refinished in 2019 with Cetol Natural Teak. Storage under cockpit floor contains Chiller unit. Steps lead up to the Flybridge. Door leads into the Master Stateroom.
- Flybridge contains helm station and bench seating aft with beautiful, elevated 360 degree views. Floor is vinyl teak and holly planks and teak trim is ready for installation. Helm station has original gauges and controls and has custom enclosure above for navigation display.
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.